Chat with us, powered by LiveChat
Wish List 0

Wearable module

$24.98

  • Product Code: ADA2487
  • Availability: In Stock
  • Ex Tax: $24.98

Would you like to add powerful and easy-to-use Bluetooth Low Energy to your wearable project Heck yeah! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new !

The makes it easy to add Bluetooth Low Energy connectivity to your F. Sew 4 traces (or solder 4 wires) and BooM! Bluetooth Low Energy!

Get started fast with the App!

Using our iOS App or Android App, you can quickly get your interactive project prototyped by using your iOS or Android phone/tablet as a controller. We have a color picker, quaternion/accelerometer/gyro/magnetometer or location (GPS), and an 8-button control game pad. After you connect to the , you can send commands wirelessly in under 10 minutes

For advanced hackers, they'll be very happy to use the standard UART RX/TX connection profile. In this profile, the acts as a data pipe, that can 'transparently' transmit back and forth from your iOS or Android device. You can use our iOS App or Android App, or write your own to communicate with the UART service.

You can do a lot more too!

This is the same module and firmware as our BLE UART Friend but in a nice rounded shape, so you can switch between the two and have the same working code. This does not have the hardware flow control pins (doesn't need 'em) so it is best used with a microcontroller with hardware serial support

  • ARM Cortex M0 core running at 16MHz
  • 256KB flash memory
  • 32KB SRAM
  • Transport: UART @ 9600 baud
  • Bootloader with support for safe OTA (Over The Air) firmware updates
  • Easy AT command set to get up and running quickly
  • Diameter: 30.5mm / 1.2"
  • Height: 4mm / 0.16"
  • Weight: 2.5g
    s***l 26/10/2020

    Cool

    Write a review

    Note: HTML is not translated!
        Bad           Good